SENA Parani-ESD1000 - Manual (Page 14)

14
3.6. Software and Utility
This configuration software and utility for firmware update is included with the product, which also can
be downloaded from http://www.sena.com
Table 3-3 Configuration Software
Software Purpose Operating System
ParaniWIN Configuration MS Windows 98SE or Higher
ParaniWizard Pairing Configuration MS Windows 98SE or Higher
ParaniMultiWizard Multi Configuration MS Windows 98SE or Higher
ParaniUpdater Firmware Update MS Windows 98SE or Higher
3.7. ParaniWIN
ParaniWIN is a program that runs on Microsoft Windows for the configuration of Parani-ESD. Install
ParaniWIN on your computer. Plug a Parani-ESD into the serial port of the computer and turn on the
power. Run ParaniWIN.
Figure 3-1 Serial Port Setting
Set each option properly and click [Confirm]. If the settings of the Parani-ESD are different from the
ParaniWin, an error message will pop up. If the Parani-ESD is in the status of connection, warning
message will pop up. Then the current connection can be cancelled by [Disconnect] button on the
main window.
CONNECT 000195000001
+++
Please Enter Password
AT+PASS=0000
Remote Configuration Enabled
AT+BTINFO?
000195000001,SD1000v2.0.3-095515,MODE0,CONNECT,0,0,HWFC