beautypg.com

Paraniwizard – SENA Parani-ESD100V2-110V2 User Manual

Page 20

background image

20

configuration should be completed. Make sure that each Parani-

ESD‟s connect LED is on. At this

point, when both Parani-

ESD‟s are restarted the connection will be established automatically.


3.8. ParaniWizard


ParaniWizard is a Wizard program that will allow you to configure a pair of Parani-

ESD‟s for an

automatic connection. To make connection with Bluetooth devices other than Parani-ESD, use
ParaniWIN or AT commands on a terminal program.
In this example, we will refer to the two Parani-

ESD‟s as ESD1 and ESD2 respectively.


Install and run ParaniWizard.

Figure 3-10 ParaniWizard Step 1

Plug ESD1 into the serial port of the host computer and power on the unit. Click [Wizard Setting]
button to configure the serial port settings of ESD1. These settings must be the same as those of the
host system, to which ESD1 will be used. Click [Next].

Figure 3-11 ParaniWizard Step 2