SENA DirectPort UPCI - Manual (Page 9)

9 DirectPort UPCI Software User Guide Rev.1.0
6. A warning message may show up depending on driver version. Click the “Continue Anyway” button.
7. An instruction message as above appears after installing multifunction adapter. Press the “Finish”
button and then “Found New Hardware Wizard” for each serial port begins.
8. Repeat steps 3 ~ 7 until “Found New Hardware Wizard” ends as many times as the number of
serial ports.
9. After a successful installation, “SENA DirectPort” can be seen under “Multifunction adapters” and
“DirectPort UPCI – Serial Port”can be seen under “Ports (COM & LPT)” in device manager.