Windows, Windows vista/2008/7 device driver installation – SENA DirectPort UPCI User Manual

Page 4

Text mode
Original mode

DirectPort UPCI Software User Guide Rev.1.0

Windows

Windows Vista/2008/7 Device Driver Installation

1. Turn off your PC and insert DirectPort UPCI board into PCI slot.

2. Turn on the PC power.

3. Start Windows Vista/2008/7 and then “Found New Hardware” message will pop up. Otherwise,
please proceed to step #7.

4. Select “Locate and install driver software (recommended)”.

5. When “Insert the disc that came with your PCI Serial Port” message window appears, insert the
driver CD into the CD-ROM drive and click the “Next” button. Device driver will start automatic
installation.

6. “The software for this device has been successfully installed” message window appears. Click the
“Close” button. PCI Serial Port has now been installed. Next step is to install driver for each separate
ports. Proceed as instructed on #12.