SENA DirectPort UPCI - Manual (Page 16)

16 DirectPort UPCI Software User Guide Rev.1.0
9. Click "Restore Defaults" to set back default values. Click the "Ok" button to finish settings.
10. If you want to change the port names of all ports sequentially, click the “All Port Remap… ” button.
11. Specify this port name as you want and click the “OK” button. The port names of the device will be
rearranged. If you use OS other than Windows Vista and Windows 7, the change is applied without
rebooting. You can check the port names by doing “ Device Manager > Action(A) > Scan for hardware
changes”. If you use Windows Vista or Windows 7 and want to apply the change without rebooting,
you need to disable the device and enable it again by clicking “Disable” option and “Enable” option
under Multifunction adapters tab like below.