SENA DirectPort UPCI - Manual (Page 6)

6 DirectPort UPCI Software User Guide Rev.1.0
10. “Browse for driver software on your computer” window appears. Click the “Browse… ” button and
select “[CD-ROM]:\Drivers\Win2000,XP,2003,Vista,2008,7” for its location. Then click the “Next”
button. In case of x64 Windows, select “[CD-ROM]:\Drivers\WinXP,2003,Vista, 2008,2008R2,7 x64”
for its location.
11. Once the installation is complete, “Windows has successfully updated your driver software”
Message box appears. “PCI Serial Port” is now successfully installed. Click the “Close” button. Next
step is to install driver for each separate ports.
12. If “PCI Serial Port” has been successfully installed, “Found New Hardware” Message box will
appear. Click “Locate and install driver software (recommended)”.