SENA HD1200 User Manual
Page 16
Starter Kit and User Manual for the HelloDevice 1200
13
for IP assignment, when it is powered up for the first time. Thus, users can see Tx LED keeps blinking
periodically as a reminder.
Since IP address of the HelloDevice is managed by an IP address database, a properly allocated MAC
2
-IP
address record should be entered into the database (See Figure 4.8). For a valid IP address, users should ask their
network administrator.
BOOTP server function
IP address tracing/modifying function
BOOTP database list
BOOTP database record
management function
Figure 4.8 IP address setting screen of the HelloDevice utility software
Take the following steps to set up the IP address, using the HelloDevice Utility Software.
Setting an IP address with the HelloDevice Utility Software:
(1) Run the HelloDevice Utility shortcut icon on the desktop of your PC and select [IP Set-up] menu click
on the [IP Set-up] window. This window provides the BOOTP server function for IP address setup (([BootP
Start], [BootP Stop]), trace function ([IP Find]) and IP address initialize functions ([IP Clear]).
(2) Press the [Add] button and enter the BOOTP database record as shown below.
2
MAC(Media Access Control) address is total 6 bytes and it is composed of 3 bytes-organization code and 3
bytes-product code. MAC address of HelloDevice is composed of 00-01-95 which is a company code and xx-xx-
xx which is a product code. E.g. 00-01-95-01-aa-08