SENA Promi-ESD02 User Manual
Page 47
Promi-ESD User Manual – Appendix A AT Commands
A-
9
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
of
to
is 0, it will wait forever.
When connection is made with other Bluetooth device, SD
response will be ‘CONNECT’ with its BD address. If there
is no connection made within this time duration, SD
response is ‘ERROR’ and the operation status becomes to
‘Standby’.
Reference
ATD, AT+BTINQ?, AT+BTCANCEL
Example
AT+BTSCAN,2,30
15
AT+BTSCAN112233445566,to
Response
OK
CONNECT 112233445566
or
OK
ERROR
Purpose
Wait for connection by the Bluetooth device with given BD
address
Parameters
112233445566=BD address
to
= time duration in seconds
Description
For the given
to
, Promi-ESD is waiting for the connection
from the Bluetooth device with the given BD address. If
the parameter of
to
is 0, it will wait forever.
When connection is made with the Bluetooth device, SD
response will be ‘CONNECT’ with its BD address. If there
is no connection made within this time duration, SD
response is ‘ERROR’ and the operation status becomes to
‘Standby’.
Reference
ATD, AT+BTINQ?, AT+BTCANCEL
Example
AT+BTSCAN000B530011FF,30
16
ATD
Response
OK
CONNECT 112233445566
or
OK
ERROR