SENA Promi-ESD02 User Manual
Page 44
Promi-ESD User Manual – Appendix A AT Commands
A-
6
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Description The Bluetooth devices in Inquiry scan mode nearby are
displayed with their BD addresses, Device names, and
Class of device.
Maximum 10 devices are scanned for 30 seconds.
Reference
AT+BTSCAN, ATD, AT+BTINFO?
7
AT+BTLAST?
Response
112233445566
OK
Purpose
Display the BD address of the last connected device
Description The Bluetooth device connected to this Promi-ESD last
time is displayed with its BD address.
Reference
AT+BTSCAN, ATD, AT+BTINFO?, AT+BTINQ?
8
AT+BTMODE,n
Response
OK
Purpose
Set operation mode
Parameters
n
=0: MODE0 (Default)
n
=1: MODE1
n
=2: MODE2
n
=3: MODE3
Description
When the operation status is ‘Pending’ currently, change
the status to ‘Standby’ with AT+BTCANCEL prior to this
command.
To take effect of this command, ATZ or power off and on.
Reference
AT+BTINFO?
Example
AT+BTMODE,2
OK
ATZ
9
+++
Response
OK
Purpose
Convert the operation status of ‘Connect’ to ‘Standby’
Description In ‘Connect’ status, data from host is transmitted to the
other side Bluetooth device, and any AT command is not