SENA Promi-ESD02 User Manual
Page 46
Promi-ESD User Manual – Appendix A AT Commands
A-
8
Copyright © 2006 Sena Technologies, Inc. All rights reserved.
Purpose
Terminate a current executing task
Description This terminates a current executing task, such as Inquiry
scan and Page scan, then converts the operation status to
‘Standby’.
Reference
AT+BTSCAN, ATD, AT+BTINQ?
13
AT+BTSCAN
Response
OK
CONNECT 112233445566
Purpose
Wait for inquiry and connection from other Bluetooth
devices
Description This allows the inquiry and connection from the other
Bluetooth devices. The operation status will be in
‘Pending’ after this command. When connection is made
and released, the operation status is back to ‘Pending’. To
convert the operation status to ‘Standby’ AT+BTCANCEL
must be used.
This has the same effect as AT+BTSCAN,3,0.
When connection is made with other Bluetooth device, SD
response will be ‘CONNECT’ with its BD address.
Reference
ATD, AT+BTINQ?, AT+BTCANCEL
14
AT+BTSCAN,n,to
Response
OK
CONNECT 112233445566
or
OK
ERROR
Purpose
Wait for inquiry and connection from other Bluetooth
devices for a given duration
Parameters
n
=1: Allows Inquiry scan
n
=2: Allows Page scan
n
=3: Allows both of Inquiry scan and Page scan
to
= Time duration in seconds
Description
For the given
to
, Promi-ESD is waiting for the inquiry and
connection from other Bluetooth devices. If the parameter