Terminal program – SENA Promi-ESD02 User Manual

Page 21

Promi-ESD User Manual – Configurations

Terminal Program

A terminal program is an application that will enable a PC to communicate
directly with a modem. If you are using Windows 98SE or higher version of
Windows, HyperTerminal program as it is included as part of the operating
system.

Promi-ESD

provides

some

extended

commands

for

its

configurations on terminal program.

This manual will explain the method using HyperTerminal. If you need to install
HyperTerminal, click start>setting>control panel>add/remove programs. For
more precise information, please refer to Help of Microsoft Windows.

Attach Promi-ESD to serial port of host computer and power on.

Launch HyperTerminal. It can be found in start >programs >accessories
>communication >HyperTerminal. Select the Serial port that Promi-ESD will be
connected to.

Input the same settings into Serial port configuration window as Promi-ESD
settings.

The settings need to be set correctly, otherwise, error message may be shown
up on the screen or cause malfunctioning of Promi-ESD.