Ocean Optics FOS-2x2-TTL - Manual (Page 13)

000-10000-040-02-1209 5
Chapter 2
FOS-2x2-TTL Specifications
This section provides information on the environmental and physical specifications of the FOS-2x2-TTL.
It also provides pinouts for the 15-pin connector.
Note
Modification of specifications and design to improve device performance are possible
without notice.
Operating Environment
The following table provides information on optimizing the operating environment of your FOS unit.
Operating Environment The FOS Unit . . .
Moisture Is designed for operation in dry rooms only.
Ventilation Should be situated so that its location or position does not interfere
with proper ventilation.
Heat Should be situated away from any device that emits excessive heat.
Object and Liquid Entry Should be positioned so that objects do not fall on top of the unit.
Additionally, ensure that no liquids are spilled into the enclosure
through openings.
Power Sources Should be connected to an approved power supply, such as the
Mikropack 12 VDC 1250mA analog regulated power supply (PS-
12V/1.25A)