Ocean Optics INLINE-TTL-S - Manual (Page 9)

000-10000-090-02-201401 3
Chapter 2
INLINE-TTL-S Specifications
This section provides information on the operating environment and physical specifications of the
INLINE-TTL-S. It also provides pinouts for the 15-pin connector.
Operating Environment
The following table provides information on optimizing the operating environment of your INLINE-TTL-
S.
Operating Environment The INLINE-TTL-S Unit . . .
Moisture Is designed for operation in dry rooms only.
Ventilation Should be situated so that its location or position does not interfere with
proper ventilation.
Heat Should be situated away from any device that emits excessive heat.
Object and Liquid Entry Should be positioned so that objects do not fall on top of the unit.
Additionally, ensure that no liquids are spilled into the enclosure through
openings.
Power Sources Should be connected to an approved power supply, such as the Mikropack
12 VDC 1250mA analog regulated power supply (PS-12V/1.25A)
Specifications
Specifications Criteria
Spectral Range UV-VIS
Shutter Input TTL maximum 5 Hz
Power Requirements 12 VDC
Power Consumption Maximum 100 mA
Weight Approximately 600 g
Size 140 x 50 x 50 mm