Ocean Optics USB-DT - Manual (Page 3)

USB-DT Installation and Operation Instructions
191-10000-000-01-201010 3
Connecting to an HR Series Spectrometer
► Procedure
Follow the steps below to connect the USB-DT to an HR Series Spectrometer:
1. Remove the USB-DT from the product packaging.
2. Connect the spectrometer’s 30-pin accessory connector to the Breakout Box using the
Breakout Box Accessory cable.
OR
3. Connect the spectrometer to the DB15 cable assembly and the other end to the USB-DT’s
15-pin connector.
You have now connected the USB-DT for operation with the HR Series Spectrometer.
USB-DT Specifications
Specification Value
Dimensions (mm) 88.9 x 94.6 x 39.7
Weight 260 g
Power consumption 1.5 A @ 5 VDC
Wavelength range (source) 200-2000 nm
Path length 1 cm
Cuvette shape Square
Light source Deuterium tungsten
Bulb life (hours) 800 (deuterium); 2,000 (tungsten)
Time to stabilized output 0.5% peak-to-peak (after warm-up)
Spectrometers USB2000,USB4000, USB2000+, HR2000, HR4000, HR2000+