Ocean Optics USB-DT - Manual (Page 2)

USB-DT Installation and Operation Instructions
2 191-10000-000-01-201010
Parts Included
The USB-DT ships with the following items:

USB-DT Light Source

5VDC power supply

DB15 accessory cable (HR4-CBL-DB15)
Additional Accessories Available
The following are additional accessories available from Ocean Optics that you may need, depending
on your system set-up:
 Fiber optic cable for connection to the spectrometer
 Breakout Box (HR4-BREAKOUT)
 USB Series Spectrometer DT adapter (USB-ADP-DT2)
 Replacement bulb (USB-DT-B)
Using the USB-DT
The following sections provide instructions on setting up and using the USB-DT.
Connecting the USB-DT
The set-up procedure differs, depending on whether you are connecting the USB-DT to a USB Series
or an HR Series Spectrometer.
Connecting to a USB Series Spectrometer
► Procedure
Follow the steps below to connect the USB-DT to a USB Series Spectrometer:
1. Remove the USB-DT from the product packaging.
2. Connect the spectrometer’s 10-pin accessory connector to the USB-DT Adapter
OR
3. Connect the spectrometer to the DB15 cable assembly and connect the other end to the
USB-DT’s 15-pin connector.
You have now connected the USB-DT for operation with the USB Series Spectrometer.