Ocean Optics Multimode Spectrum − Lab Versions - Manual (Page 13)

Chapter 2
Set-up and Operation
Overview
This section provides instructions for setting up and operating the laser. Read all instructions and
warnings carefully before attempting to install and operate your laser.
Set-up
The laser set-up procedure differs, depending on whether you are going to control the output power
automatically via the Internal Preset mode (Model LASER-785-IP-LAB), manually through the unit’s
front panel (Models LASER-785-LAB-ADJ and LASER-785-LAB-ADJ-S), or remotely (all models).
Laser Rear Panel View
LASER-785-LAB-02-0409 5