Ocean Optics DT-Mini-2-GS - Manual (Page 13)

2: DT-Mini-2-GS Specifications
000-10000-110-02-1209 5
Rear Panel
Rear View
Power Input Connector
When a 12VDC connection is supplied to the DT-Mini-2-GS, the lamp automatically switches to the
basic operating mode. The LED indicator on the front panel will light to reflect this condition.
Lamp ON/OFF/TTL Switch
When this switch is turned ON (when the lamp has power), you can operate the lamp by using the
switches on the front panel.
Switch Position Function
ON The deuterium and halogen bulbs are illuminated.
OFF The deuterium and halogen bulbs are not illuminated.
TTL The lamp is powered up and can be controlled by the
SUB-D connector:
 Pin 1 = Deuterium ON/OFF
 Pin 5 = Halogen ON/OFF
 Pin 10 = Ground
 Pin 13 = Shutter Open/Close