Ocean Optics DT-Mini-2-GS - Manual (Page 11)

000-10000-110-02-1209 3
Chapter 2
DT-Mini-2-GS Specifications
This section provides information on the operating environment and physical controls of the DT-Mini-2-
GS.
Operating Environment
The following table provides information on optimizing the operating environment of your DT-MINI-2-
GS.
Operating Environment The DT-Mini-2-GS Unit . . .
Moisture Is designed for operation in dry rooms only.
Ventilation Should be situated so that its location or position does not interfere
with proper ventilation.
Heat Should be situated away from any device that emits excessive heat.
Object and Liquid Entry Should be positioned so that objects do not fall on top of the unit.
Additionally, ensure that no liquids are spilled into the enclosure
through openings.
Power Sources Should be connected to a power supply only of the type described in
the operating instructions or as marked on the unit.
DT-Mini-2-GS Components
The following sections describe the components located on the front and rear of the DT-Mini-2-GS.