Ocean Optics JAZ-ALP - Manual (Page 13)

013-RD000-001-02-201208 5
Chapter 2
Operation
Overview
The Jaz-ALP device comes preset for operating in a Jaz stack at a distance of 2 to 14 meters from the
object at which the laser is being aimed. Should you need to adjust the system for a longer distance, use
the following instructions.
Adjusting the Jaz ALP Module
On the rear side of the JAZ-ALP module close to the power switch there are four TORX socket screws.
Compare with the figures below. By rotating the screws you can adjust the direction of the laser beam.
Rear View of Jaz ALP Module with On/Off Switch and Adjustment Screws