Ocean Optics FHSA-TTL - Manual (Page 8)

1: Setup
2 000-10000-140-02-1209
Contents
Your package should contain the following:

FHSA-TTL device

One IC-DB15-2 interface cable for shutter operation

One Ocean Optics Software and Technical Resources CD
Setup
► Procedure
To set up your FHSA-TTL device,
1. Plug the power supply into the main connection.
2. Plug the connector of the power supply into the 12 VDC Input connector of the FHSA-TTL
device.
3. Remove the SMA connectors protection caps.
4. Attach the SMA connectors on your fibers to the SMA plugs.
5. Plug in the IC-DB-15-2 cable into the TTL connector for automatic TTL-operation (cable
included).
6. Set the operating mode using the shutter switch.