Ocean Optics Vivo - Manual (Page 11)

1: Setup and Operation
000-vivo-110-02-201208 3
At the right side of the device there is a green power switch next to the DC power socket. On the front
there are two push buttons and three rotating switches. The push buttons can be used to switch on one pair
of bulbs. The rotating switches regulate the intensity of the bulbs. Refer to the picture below.
Connecting an Optical Fiber
To connect an optical fiber with an SMA connection, use the SMA-barrel. The fiber with the SMA-barrel
must be mounted from the bottom of the device.
►
Procedure
1. Push the fiber till the SMA-barrel completes with the end of the SMA lead-through.