Dh-3 specifications, Operating environment, Specifications – Ocean Optics Deuterium-Halogen Calibration Light Source User Manual
Page 12: Chapter 2

000-10000-191-02-201309
4
Chapter 2
DH-3 Specifications
This section provides information on the operating environment and specifications of the DH-3 Series
light sources.
Operating Environment
The following table provides information on optimizing the operating environment of your DH-3
calibration light source.
Operating Environment The DH-3 Unit . . .
Moisture
Is designed for operation in dry rooms only.
Ventilation
Should be placed so that its location or position does not interfere with proper
ventilation.
Heat
Should be placed away from any device that emits excessive heat.
Object and Liquid
Entry
Should be positioned so that objects do not fall on top of the unit. Additionally,
ensure that no liquids are spilled into the enclosure through openings.
Specifications
Specification
Value
Spectral Range (calibrated):
Regular Models
EXT Models
230 – 1100 nm
230 – 2400 nm
Dimensions (LWH):
DH-3-BAL-CAL and DH-3-BAL-CAL-EXT
DH-3 plus-BAL-CAL and DH-3plus-CAL-EXT
13.8 cm x 6.3 cm x 6.1 cm; 5.4" x 2.5" x 2.4"
14.5 cm x 6.3 cm x 6.1 cm; 5.7" x 2.5" x 2.4"
Power Input/ Max. Power Consumption
100 W/ 190 W heating D-Lamp for 20 seconds
Time to Stabilized Output
20 minutes
Connector
CC-3 cosine corrector
Shutter:
Regular Models
plus Models
No
Yes