PolyPlanar MR45C - Manual (Page 16)

16
U S B O P E R A T I O N
A U X O P E R A T I O N
SWITCHING TO AUX MODE
This unit can be connected to any portable devices such as an iPod®, MP3
Players, TV or DVD through the AUX IN jack on the front or at the back of
the unit.
Press MODE
button to change the mode to ―AUX 1‖ (back) or ―AUX 2‖
(front) mode.
Please Note: In this mode, all controls and functions has to be controlled
from your music device.
SWITCHING TO USB MODE
If there is no USB memory stick inserted in the driver:
Insert a USB memory stick through the USB port located at the back of the
unit. Then press MODE button to change to USB mode.
If a USB memory stick is already inserted in the driver:
Press MODE button to change to USB mode.
Refer CD/MP3/WMA operation on pages 12-14 for further instructions.
IMPORTANT NOTE:
Some USB devices may not be compatible with the unit.
Some USB devices may take more than 45 seconds to initiate after
plugging in. If this happen, try to remove the USB memory stick and insert
it again.
CAUTION
If there are important files in the USB device, do not connect it to the main
unit to play. Any wrong operation may cause file loss. Our company
assumes no responsibility for lost files or directories.
Media type USB (can support USB2.0 but the speed is USB1.1.)
Capacity up to 999 songs