Factory Direct Hardware Hansgrohe 11043 - Manual (Page 6)

6
English
(1) Install the spindle extensions.
() Cut each spindle extension so that it extends ³⁄₁₆"
outside the surface of the finished wall.
(3) Remove the plug from the spout outlet.
(1) Install the slip connectors.
() Cut each slip connector so that it extends ⁵⁄₁₆"
outside the surface of the finished wall.
(1) Measure the distance from the spout outlet of the
rough to the outside of the plaster shield ("X").
() Cut the nipple so that it is X + 1¾" mm long.
4
1.
.
3.
17 mm
5
1.
.
6
1.
.
X + 1¾"
1.