Factory Direct Hardware Hansgrohe 39454 Axor Citterio - Manual (Page 5)

• Lower the handshower holder onto the
handshower tee, feeding the hose assembly
under the tub. The hole on the rear of the
handshower holder should go over the
positioning pin on the handshower holder
tee.Install the handshower holder escutcheon
over the handshower holder. Screw it down
over the tee.
• Screw the sub-escutcheon rings onto the
hot and cold valves..
• Press the hot and cold escutcheons over
the sub-escutcheon rings.
• Inspect the handles, making sure that they
are aligned properly.
• If the handle is not straight, remove it from the valve
by grasping the barrel and turning it counter
clockwise.
+2
7
+2 7
+2
7
+2 7
&2
/ '
&2 / '
& 2 /'
&2 /'
+2 7
+2 7
+2 7
+2 7
&2
/ '
&2 / '
& 2 /'
&2 /'