Factory Direct Hardware Hansgrohe 39454 Axor Citterio - Manual (Page 3)

Installation Instructions
The water supply must be turned off at the main prior to
installation of this kit.
• Remove the plastic plaster shields from
the valves and the spout tee. Use a
phillips head screwdriver to remove the
screws from the white plastic handle
snap connectors. Remove the snap
connectors.
• Press the diverter firmly into place in the
spout tee. Remove the cold cartridge.
• Install the new cold cartridge included
with the trim kit.
• Pull upward on the handshower holder
plaster shield. Pull the outer Secu-flex hose
completely away from the deck. Unscrew
the white plastic winged nut from the
bottom of the Secu-flex hose. Put the outer
hose away in a safe location. Be ex-
tremely careful to prevent the high pressure
hose from falling back beneath the tub.