beautypg.com

Technical data, Installation considerations – Factory Direct Hardware Hansgrohe 39116 User Manual

Page 2

background image

Citterio Wall-Mount Lavatory Trim

39115XX1

��

���

��

���

��

Technical Data

Maximum incoming water pressure

145 psi

Recommended incoming pressure

14.5 - 7 psi

Recommended hot water temperature

10

o

F - 140

o

F*

Flow rate

. gpm

The hot and cold supplies must be of equal pressure for proper operation of the faucet.

*Know and follow all applicable local codes when setting the temperature of the water heater.

Installation Considerations

·

Rough-in 38111181 (purchased separately) must be installed and the finished wall

complete before installation of this trim kit.

·

For best results, Hansgrohe recommends installation by a licensed, professional

plumber.

·

No drain is included with this faucet. Contact the manufacturer of the sink for

recommendations regarding suitable drains.

·

Turn the water off at the main before beginning installation.

Recommended tools (not included)

7 mm & 17 mm deep sockets

1 mm allen wrench

Teflon

TM

thread tape

cutting tools

waterproof bathroom sealant, compatible with the wall surface