beautypg.com

Factory Direct Hardware Hansgrohe 34315 User Manual

Page 2

background image

Technical Information

Max. flow rate

. gpm

Max. water pressure

145 psi

Recommended water pressure

14.5 – 7 psi

Recommended hot water temp.

10°F – 140°F*

*Know and follow all applicable local plumbing codes when setting the

temperature on your water heater.

Installation Considerations

Rough valve 10303181 must be installed. The finished wall must be installed and made wa-

tertight before installation of this trim kit.
For best function of this unit, the hot and cold supplies must be of equal pressure.
This faucet may be used with a continuous flow water heater as long as the flow pressure is at

least 14.5 psi.
For best results, Hansgrohe recommends that this faucet be installed by a licensed professional

plumber.
Turn the water off at the main before beginning installation.


Axor Citterio M Wall-mount Lavatory Faucet

34315XX1