Factory Direct Hardware Hansgrohe 39410 Axor Citterio - Manual (Page 5)

5
Cleaning Recommendation for Hansgrohe Products
Modern faucetry and shower products utilize a combination of materials to
comply with the needs of the market with regard to design and functionality.
To avoid damage, it is necessary to use some caution when cleaning. Damage
caused by improper treatment is not covered under the Hansgrohe warranty.
Cleaning Materials for Faucets and Showers
• To remove lime scale, use only products made specifically for that purpose.
Always follow the manufacturer’s instructions when using.
• Do not use cleaners that contain hydrochloric, formic, acetic, or phosphoric
acids, as these will cause considerable damage to finishes and to plastic
components.
• Never mix cleaning materials.
• Never use cleaners containing abrasives. Do not use abrasive cleaning
cloths, pads, or sponges.
Cleaning Procedures
• Clean your faucets and shower products as and when required. Regular
cleaning will prevent scale buildup and water spotting.
• Follow the label instructions. Do not allow any cleaner to remain on the
product for longer than necessary.
• When using spray cleaners, spray first onto a sponge or cloth – do not
spray directly onto the product.
• After cleaning, rinse thoroughly with clear water to remove any cleaner
residue.
Important
• Soap and shampoo residue can also cause damage to the product. Rinse
well with clean water after use.
• If the surface is already damaged, harsh cleaning materials will cause
further damage.