beautypg.com

Factory Direct Hardware Hansgrohe 39410 Axor Citterio User Manual

Page 3

background image

3

Installation Instructions

Seal the wall around the female pipe

fitting using a good quality waterproof

bathroom sealant.

Wrap the mounting piece clockwise

with 2-3 layers of good quality

plumbers’ thread tape.

Screw the mounting piece into the pipe

fitting. Tighten with the 12 mm hex

wrench. Do not overtighten! The

mounting piece should extend 1 3/16”

- 1 3/8” outside the surface of the

finished wall.

Slide the tub spout over the mounting piece until flush with the surface of the

finished wall.

Secure the tub spout to the mounting piece with the set screw, using the 3 mm

Hex wrench.