Neutrik NPPA-TT-S PATCH PANEL “Easy Patch” User Manual

Page 8

Text mode
Original mode

Page 8 of 13

NPPA-TT-S Instruction Manual

Grounding Variations

NOTE: In standard configuration there is no ground connection between top and bottom row

unless it is provided by an inserted patch cable. If this is required, as in the case of
phantom powered microphone lines, either make an internal connection by individually
wiring the corresponding upper and lower ‘S’ terminals, or if the latter is critical with
respect to possible ground loops make the connection via patch cable instead of using
the normalling feature.

5. Wiring

For access to the terminals remove the top- and bottom-cover with three cross-recessed screws
(M2.5x8) each fixed in a triangle.

Rear front for wiring