Specifications – dbx 1046 User Manual

Page 44

Input / Entrée / Eingang / Entrada
Connectors:

Female XLR and 1/4" TRS (Pin 2 and tip hot)

Connecteurs

XLR femelles et jacks stéréo 6,35 (point chaud = borne 2 et pointe)

Anschlüsse:

XLR-Buchsen weibl. und 6,3-mm-Stereoklinkenbuchsen (Inphase = Stift 2 bzw. Spitze)

Conectores:

Hembra de XLR y jack estéreo 6,3 mm (espiga 2 y punta = en fase)

Type:

Electronically balanced/unbalanced, RF filtered

Type :

Symétrie, asymétrie électroniques, filtrées contre les interférences radio

Schaltung:

Elektronisch symmetriert/asymmetrisch, HF-geschützt

Tipo:

Electrónicamente balanceado/desbalanceado, con filtro RF

Impedance:

Balanced > 50 kΩ, unbalanced >25 kΩ

Max Input Level:

> +24 dBu balanced or unbalanced

CMRR:

40 dB; Typically >55 dB at 1 kHz

Output / Sortie / Ausgang / Salida
Connectors:

Male XLR and 1/4" TRS (Pin 2 and tip hot)

Connecteurs :

XLR mâles et jacks stéréo 6,35 mm (point chaud = broche 2) et bornier

Anschlüsse:

6,3-mm-Stereoklinkenbuchsen, XLR-Buchsen männl. (Inphase = Stift 2 bzw. Spitze)

Conectores:

Clavijas jack estéreo 6,3 mm, XLR macho (espiga 2 y punta = en fase)

Type:

Servo-balanced/unbalanced, RF filtered

Type :

Symétrique, asymétrique, filtrées contre les interférences radio

Schaltung:

Servosymmetriert/asymmetrisch, HF-geschützt

Tipo:

Balanceado/desbalanceado, con filtro RF

Impedance:

Balanced 60Ω, unbalanced 30Ω

Max Output Level:

> +21 dBu, >+20 dBm balanced/unbalanced

System Performance/ Caractéristiques système / Audiodaten / Datos audio
Bandwidth:

20 Hz to 20 kHz, +0/-0.5 dB

Frequency Response:

0.35 Hz to 200 kHz, +0/-3 dB

Noise:

< -94 dBu, unweighted, 22 kHz measurement bandwidth

Dynamic Range:

> 118 dB, unweighted

THD+Noise:

0.009% typical at +4 dBu, 1 kHz unity gain
0.09% typical at +20 dBu, 1 kHz, unity gain
< 0.1% any amount of compression up to 40 dB, 1 kHz

IMD:

< 0.1% SMPTE

Interchannel Crosstalk:

< -85 dB, 20 Hz to 20 kHz

VCA:

dbx V2™

Stereo Coupling:

True RMS Power Summing

Compressor / Compresseur / Kompressor / Compresor
Threshold Range:

-40 dBu to +20 dBu

Ratio:

1:1 to ∞:1

Threshold Characteristic:

Selectable OverEasy® or hard knee

Attack/Release Characteristic:

AutoDynamic™

Attack Time:

Program-dependent, typically 15ms for 10 dB, 5 ms for 20 dB, 3 ms for 30 dB

Release Time:

Program-dependent, typically 125 dB/sec

Output Gain:

-20 to +20 dB

Limiter I Limiteur / Limiter / Limitador
Threshold Range:

+4 dBu to +22 dBu (off)

Ratio:

∞:1

Limiter Type:

PeakStopPlus™ two-stage limiter

Stage 1:

Instantaneous Transient Clamp™

Attack Time:

Zero

Release Time:

Zero

Stage 2:

Intelligent Predictive Limiting™

Attack Time:

Program-dependent, typically <5 msec

Release Time:

Program-dependent, typically 22 dB/sec

Function Switches / Touches de fonction / Funktionstasten / Conmutadores de funciones
OverEasy®:

Activates the OverEasy® compression function.
Active la fonction compression OverEasy®.
Schaltet zwischen OverEasy®- und Hard Knee-Kennlinie um.
Activa la función de compresión OverEasy®

Specifications / Spécifications techniques
Technische Daten / Especificaciones

SPECIFICATIONS