beautypg.com

Swanstone STMK96-(xxxx) - Installation User Manual

Page 16

background image

1.

Apply color-matched 100% silicone sealant, as shown.

2.

Apply white silicone sealant, as shown. This white
silicone sealant is non-paintable.

The installation is now complete. DO NOT discard these
installation instructions. PLEASE LEAVE THEM WITH THE
HOMEOWNER.

Attaching Shower Doors and Accessories

1.

Follow the mounting instructions that come with each
accessory.

2.

Drill pilot holes, where fasteners pass through the wall
panels, slightly larger than the fastener.

3.

If anchors are being used, drill the hole in the panel large
enough for the head of the anchor to fit through the panel
and the structural wall behind it.

4.

Use 100% silicone to seal any holes or joints between the
accessory and the wall panel.

Installation Procedure

The Swan Corporation – Swanstone

16

800-325-7008