Swanstone SA-38 NEO - Installation - Manual (Page 7)

SA-3232 Alcove Shower Wall Kit
For shower floors 32 inches wide and 32 inches deep.
Designed for use with Swan Corporation SS-3232 Single
Threshold Shower Floor or other manufacturer’s shower
floor of the same dimensions.
Note: Other manufacturer’s shower floors must have a
nailing/tiling flange around the back and sides of the
base.
One back panel.
One left side panel.
One right side panel.
SA-3636 Alcove Shower Wall Kit
For shower floors 36 inches wide and 36 inches deep.
Designed for use with Swan Corporation SS-3636 Single
Threshold Shower Floor or other manufacturer’s shower
floor of the same dimensions.
Note: Other manufacturer’s shower floors must have a
nailing/tiling flange around the back and sides of the
base.
One back panel.
One left side panel.
One right side panel.
SA-3448 Alcove Shower Wall Kit
For shower floors 48 inches wide and 34 inches deep.
Designed for use with Swan Corporation SS-3448 Single
Threshold Shower Floor or other manufacturer’s shower
floor of the same dimensions.
Note: Other manufacturer’s shower floors must have a
nailing/tiling flange around the back and sides of the
base.
One back panel.
One left side panel.
One right side panel.
SA-38NEO Alcove Corner Shower Wall Kit
For corner shower floors 38 inches wide and 38 inches
deep. Designed for use with Swan Corporation
SS-38NEO Neo-Angle Shower Floor or other
manufacturer’s shower floor of the same dimensions.
Note: Other manufacturer’s shower floors must have a
nailing/tiling flange around the sides of the base.
One corner panel.
One left side panel.
One right side panel.
ABS-006 ABS-003
General Information
800-325-7008 7 The Swan Corporation