Swanstone SS-7211 - Installation - Manual (Page 4)

Installation Procedure
Followed carefully, these installation instructions will result in
an easy, trouble-free installation of your Swanstone product.
Any deviations, additions, and/or deletions from the prescribed
installation, without prior written approval, will void the warranty
covering this product. Not following the directions could also
result in personal injuries, water damage, and other damage to
floors, pipes, walls, and other portions of your building or
home.
Disclaimer
The information contained in this Installation Manual is
given free of charge. It is based upon technical data which
we believe to be reliable and is intended for use, by
persons having knowledge of this technical area, at their
own discretion and risk. Swanstone assumes no
responsibility for results obtained or damage incurred from
the use of this material either in whole or in part by the
buyer.
This manual will give you basic instructions for the
installation of the product in a step-by-step sequence that
will work in most types of installations. If you have an
installation application that is not covered in this manual,
please call your local Swanstone distributor or contact The
Swan Corporation directly for additional information about
your application.
Follow all installation instructions. Failure to follow these
instructions could result in personal injuries, water damage,
or other damage to floors, pipes, walls, or other portions of
your building or home.
Soap Dish Installation
The soap dish is a corner mount design. The soap dishes can
be stacked in one corner or placed in opposite corners.
Note: The current production soap dish is molded with a
square corner (as shown in the illustrations). This shape
requires installation of the optional corner molding after
installation of the soap dish.
Cleaning Wall Panel
Fumes Hazard
The fumes from the silicone and solvents
used by the installer can be harmful if used in
an unventilated room. Always work in a well-ventilated
area. To keep the area well-ventilated, open windows and
use exhaust fans. If adequate ventilation is not achievable
or practical, use respiratory protective equipment.
Clean each wall panel with denatured alcohol or another non
oil-based cleaning solvent where the soap dish will be
installed.
Do not use oil-based cleaners, such as mineral spirits, to
clean the panels. The oil in the cleaner will prevent the panel
from adhering properly to the wall.
Installation of Corner Soap Dish
1. Select a desirable height for mounting one or both soap
dishes. A height of at least 43” from the shower floor to
the soap dish is recommended.
43"
IMPORTANT NOTICE
WARNING
The Swan Corporation – Swanstone 4 800-325-7008
Installation Procedure