Derale Performance Fluid Control Thermostat Mounting Bracket - Manual

25793-InstructionSheet
Derale Performance, Los Angeles, CA 800.421.6288 www.derale.com
INSTALLATION INSTRUCTIONS
FLUID CONTROL MOUNTING BRACKET
PART # 25793
KIT CONTENTS
QTY. DESCRIPTION
1 Mounting Bracket
4 1/4-20 x 3/8” Stainless Bolts
4 #14 Sheet Metal Screws
Please read these instructions completely before starting the installation.
MOUNTING LOCATION
INSTALLATION
Choose a convenient location on the vehicles frame,
firewall, core support or sub frame.
1. Using the four 1/4-20 x 3/8” Stainless Bolts, attach the
Mounting Bracket to the fluid control thermostat in the
desired orientation. (See Diagram #1)
Loctite or suitable sealant can be used for a more
permanent installation.
2. Using the Mounting Bracket Assembly as a template,
mark and drill four 3/16” holes in the desired location.
3. Using the four #14 Sheet Metal Screws, attach the
Mounting Bracket Assembly.
NOTE:
Warning: Installation of accessories should only be undertaken by those with mechanical knowledge and are familiar with working on
vehicles. Always use eye protection (goggles, safety glasses or shield). Park the vehicle in a well lit area, on level ground and apply the
parking brake. Only work on a cold vehicle that has been sitting overnight, failure to do so will result in severe burns and injury. Before starting
the vehicle, make sure no tools or any other items are left under hood that could interfere with or be drawn into moving parts of the engine.
Failure to follow instructions can lead to severe damage and personal injury.
Option 1
Mounting
Bracket
Option 2
Diagram #1
TOOLS NEEDED
Allen Wrench Marker
Drill
3/16” Drill Bit
Standard Screw Driver
1/4-20 x 3/8” Stainless Bolts
1/4-20 x 3/8” Stainless Bolts
Mounting
Bracket
Thermostat
(Not Included)
Thermostat
(Not Included)