Powersolve TES 2N Series - Manual

www.powersolve.co.uk
Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
Line regulation: ±0.5% max.
Load regulation: Single output models: ±0.75% max. Dual output models: ±2.0% max.
Ripple & Noise: <50 mVpk-pk (20 MHz BW)
Conducted EMI: EN55022, class A, and FCC, level A (internal filter)
Short circuit protection: continuous, automatic recovery
Efficiency: 78% typ.
Operating temperature range: –40°C … +71°C
I/O isolation voltage: 1500 VDC
Safety standards: cUL/UL 60950, IEC/EN 60950
Case: plastic (UL 94V-0 rating)
Order Code Input voltage Output voltage Output current
max.
TES 2N-0510 3.3 VDC 500 mA
TES 2N-0511 5 VDC 400 mA
TES 2N-0512 12 VDC 165 mA
TES 2N-0513 4.5 – 9 VDC 15 VDC 135 mA
TES 2N-0521 ±5 VDC ±200 mA
TES 2N-0522 ±12 VDC ±85 mA
TES 2N-0523 ±15 VDC ±65 mA
TES 2N-1210 3.3 VDC 500 mA
TES 2N-1211 5 VDC 400 mA
TES 2N-1212 12 VDC 165 mA
TES 2N-1213 9 – 18 VDC 15 VDC 135 mA
TES 2N-1221 ±5 VDC ±200 mA
TES 2N-1222 ±12 VDC ±85 mA
TES 2N-1223 ±15 VDC ±65 mA
TES 2N-2410 3.3 VDC 500 mA
TES 2N-2411 5 VDC 400 mA
TES 2N-2412 12 VDC 165 mA
TES 2N-2413 18 – 36 VDC 15 VDC 135 mA
TES 2N-2421 ±5 VDC ±200 mA
TES 2N-2422 ±12 VDC ±85 mA
TES 2N-2423 ±15 VDC ±65 mA
TES 2N-4810 3.3 VDC 500 mA
TES 2N-4811 5 VDC 400 mA
TES 2N-4812 12 VDC 165 mA
TES 2N-4813 36 – 72 VDC 15 VDC 135 mA
TES 2N-4821 ±5 VDC ±200 mA
TES 2N-4822 ±12 VDC ±85 mA
TES 2N-4823 ±15 VDC ±65 mA
• Ultracompact SMD-Package
• Wide 2:1 Input Range
• Regulated Output
• I/O Isolation 1500 VDC
• Operating Temperature Range –40°C to +71°C
• Low Ripple and Noise
• Short Circuit Protection
• Input Filter to meet EN 55022, Class A
• Reflow solder temperature up to 250°C
DC-DC Converters
TES 2N Series, 2 Watt
Models
Pin Single Output Dual Output
1 – Vin (GND) – Vin (GND)
7 No con. No con.
8 No con. Common
9 + Vout + Vout
10 – Vout – Vout
16 + Vin + Vin
Pin-Out
1
16
9 8
2.54 (0.1)
3
(0.13)
15.24 (0.6)
18.1 (0.71)
13.7 (0.54)
23.8
(0.94)
0.25
(0.01)
7.6
To
p V
iew
(0.30)
() = Inches