Powersolve THI Series - Manual

www.powersolve.co.uk
Powersolve Electronics Ltd. 8A, Arnhem Road, Newbury, RG14 5RU. England
Tel:01635 521858 Fax: 01635 523771 Email: [email protected]
Line regulation: ±0.5% max.
Load regulation: – Single output models: ±1% max.
– Dual output models: ±1% max.
Ripple & Noise: <50 mVpk-pk (20 MHz BW)
Input filter: Pi-filter
Short circuit protection: continuous, automatic recovery
Efficiency: 61% typ.
Operating temperature range: –40°C … +85°C above 70°C derating 3%/°C
I/O isolation voltage: 2500 VACrms (60sec)
I/O isolation test voltage: 6000 Vpk (1 sec.)
I/O isolation capacitance: 20 pF typ.
I/O isolation resistance: >10,000 Mohm
I/O clearance and creepage distances: 2.5 mm resp. 4.0 mm min.
Safety standards / approvals: IEC/EN 60950, IEC/EN 60601-1 (rated for 250 VAC working voltage)
test report by BSI (British Standards Institute)
Case: plastic (UL 94V-O rating)
Order Code Input voltage Output voltage Output current
max.
THI 0511 5 VDC 400 mA
THI 0512 12 VDC 165 mA
THI 0513 5 VDC ±10% 15 VDC 130 mA
THI 0520 ±5 VDC ±100 mA
THI 0521 ±12 VDC ±80 mA
THI 0522 ±15 VDC ±65 mA
THI 1211 5 VDC 400 mA
THI 1212 12 VDC 165 mA
THI 1213 12 VDC ±10% 15 VDC 130 mA
THI 1220 ±5 VDC ±100 mA
THI 1221 ±12 VDC ±80 mA
THI 1222 ±15 VDC ±65 mA
THI 2411 5 VDC 400 mA
THI 2412 12 VDC 165 mA
THI 2413 24 VDC ±10% 15 VDC 130 mA
THI 2420 ±5 VDC ±100 mA
THI 2421 ±12 VDC ±80 mA
THI 2422 ±15 VDC ±65 mA
= DIL-24 Plastic Package
= I/O Isolation Voltage 2500 VAC
= Supplementary Insulation rated for Working Voltage 250VAC
= Complies with IEC/EN 60950 and 60601-1 Safety Standard
= Operating Temperature Range –40°C to +85°C
= I/O-Clearance 2.5 mm min.
= Low Coupling Capacity
= Full SMD Design with Ceramic Caps
DC/DC Converters,
THI Series, 2 Watt
Models
Pin Single Output Dual Output
1 + Vin (Vcc) + Vin (Vcc)
2 + Vin (Vcc) + Vin (Vcc)
10 No pin Common
11 No pin Common
12 – Vout No pin
13 + Vout – Vout
15 No pin + Vout
23 – Vin (GND) – Vin (GND)
24 – Vin (GND) – Vin (GND)
Pin-Out
10
11
12
24
23
1
2
15
13
Bottom view
20
15.24 2.4
(0.6)
(0.79)
(0.1)
10 4
(0.4) (0.16)
27
.9
4
2.
0
32
2.54
2.54
20.32
2.54
(1.25) (1.1) (0.8)
(0.08)
(0.1)
(0.1)
(0.1)
() = Inches Pin Ø 0.5 mm (0.02)
High Isolation