Prokit's Industries 3PK-9912 - Manual (Page 3)

SAFETY INFORMATION
The AC/DC clamp meter has been designed according to IEC1010 – 1 and
IEC1010 – 2 – 032 concerning safety requirements for electrical measuring
instruments and hand – held current clamps with an overvoltage category (CAT
II) and pollution 2.
SAFETY SYMBOLS
Important safety information, refer to the operating manual.
Dangerous voltage may be present.
Earth ground.
Double insulation (Protection class II).
The AC/DC clamp meter complies with the requirements of the following
European Community Directives: 89/336/EEC (Electromagnetic Compatibility)
and 73/23/EEC (Low Voltage) as amended by 93/68/EEC (CE Marking).
However, electrical noise or intense electromagnetic fields in the vicinity of the
equipment may disturb the measurement circuit. Measuring instruments will also
respond to unwanted signals that may be present within the measurement
circuit.
Users should exercise care and take appropriate precautions to avoid
misleading.
SAFETY PRECAUTIONS
Follow all safety and operating instructions to ensure maximum personal safety
during the operation and to ensure the meter is used safely and is kept in good
operating condition.