Prokit's Industries 3PK-9912 - Manual (Page 13)

screws completely before using the meter to avoid electrical shock hazard.
If “ ” appears on display, it indicates that the battery should be replaced.
Use the following procedure to replacing the battery:
-10-
1. Disconnect test leads from any live source, turn the rotary switch to OFF,
and remove the test leads from the input terminals.
2. The battery cover is secured to the bottom case by a screw. Using a
screwdriver, remove the screw from the battery cover and remove the
battery cover.
3. Remove battery and replace with a new equivalent 9 volt battery.
4. Replace the battery cover and reinstall the screw.
ACCESSORIES
• Operator’s instruction manual
• Set of test leads
• Gift box
• 9 volt battery. NEDA 1604 6F22 006P type
CAUTION:
Using this appliance in an environment with a strong radiated radio-frequency
electromagnetic field (approximately 3V/m),may influence its measuring accuracy.
The accuracy can be reduced to ± (12% of reading + 6 digits).
The measuring result can be strongly deviating from the actual value.
The measuring result can be strongly deviating from the actual value.