Prokit's Industries MT-8006B - Manual (Page 14)

MAINTENANCE
WARNING:
 To avoid electric shock, do not perform any servicing other
than that contained in the operating instructions unless you
are qualified to do so.
 Disconnect clips from any metallic connections before
performing any maintenance.
If moisture should get inside the Data Diver, let the Data Diver dry at
normal room temperature for 24 hours. DO NOT HEAT THE DATA
DIVER. Moisture can provide a leakage path that may conduct
hazardous voltages to you. DO NOT USE the Data Diver if wet.
Keypad Care
Daily use of your Data Diver results in various liquids, dirt, and other
foreign material building up in your keypad. The keypad may be
cleaned by using a soft toothbrush with soap and water.
Do not use a petroleum-based or chlorinated cleaning agent as it will
harm the keypad. Let the Data Diver dry before using!
Data Diver Trouble Shooting:
1. The MT-8006B Data Diver is a professional telecom tool,
especially designed for checking telecom lines. It is not allowed to
be used under the power source AC100~125V 50/60Hz or
AC200~250V 50/60Hz; otherwise, it may cause the danger of
electric shock or product damage.
2. If there is any crosstalk in application, generally it is the
interference from the telecom line; please check if the angled bed
of nail clips well connected to the telecom line.
3. If any abnormal situation is found while you are using the Prokit's
Data Diver, please test the other telecom line in the different area
to identify the possible defective situation referring to the trouble
shooting list below. (Attention! Please never have the angled bed
of nail clips connected to the power source for safety reason.)
4. If the Data Diver still doesn't work after the first step of fix-up,
please send back to Prokit’s distributor for repairing
13