Prokit's Industries MT-1132 User Manual
Page 3
2
DURING USE
Never exceed the protection limit values indicated in
specifications for each range of measurement.
When the meter is linked to measurement circuit, do not touch
unused terminals.
Never use the meter to measure voltages that might exceed
500V above earth ground in category III
installations.
When the value scale to be measured is unknown, set the
range selector at the highest position.
Before rotating the function / range selector to change
functions, disconnect test leads from the circuit under test.
When carrying out measurements on TV or switching power
circuits always remember that there may be high amplitude
voltages pulses at test points, which can damage the meter.
Always careful when working with voltages above 60V DC or
30V AC rms. Keep fingers behind the probe barriers while
measuring.
Before attempting to insert transistors for testing, always be
sure that test leads have been disconnected from any
measurement circuits.
Components should not be connected to the hFE socket when
making voltage measurements with test leads.
Never perform resistance measurements on live circuits.
GENERAL DESCRIPTION
The meter is a handheld 3 1/2 digital multimeter for measuring
DC and AC voltage, DC current, Resistance, Diode, Transistor
and Continuity Test with battery operated.