Prokit's Industries PT-1080 - Manual (Page 3)

Before any use, refer to the corresponding paragraph in the present manual.
DESCRIPTION OF SYMBOLS
Symbols are used in this manual to attract your attention to possible risks .The safety
symbols and the explication which accompany them must be perfectly understood. The
warning themselves do not prevent the risks and can not be a substitute for proper
methods of avoiding accidents.
This symbol before a safety comment indicates a precaution a warning or a danger.
Ignoring this warning can led to an accident for yourself or others. TO limit the risk of
injury, fire, or electrocution always apply the recommendations indicated.
Conforms to relevant safety standards.
GENERAL SAFETY INSTRUCTIONS
WARNING
Read all safety warnings and all instructions
Failure to follow all warnings and instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future reference
The term “power tool” in the warnings refer to your mains operated (corded) power tool or
battery operated (cordless) power tool.
1) Work area
a) Keep work area clean and well lit. Cluttered and dark areas invite accidents.
b) Do not operate power tools in explosive atmospheres, such as in the
presence of flammable liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c) Keep children and bystanders away while operating a power tool. Distractions
can cause you to lose control.
2) Electrical safety
a) Power tool plugs must match the outlet. Never modify the plug in any way.
Do not use any adapter plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk of electric shock if
your body is earthed or grounded.
2
c) Do not expose power tools to rain or wet conditions. Water entering a power
tool will increase the risk of electric shock.