Prokit's Industries NT-6570 - Manual (Page 8)

shows. The laser is switched on.
Aim at the point (1) and trigger the measurement. After the
first measurement the value is adopted. The second distance to
be measured flashes in the symbol, keep the instrument as
horizontal as possible. The tool default measurement result is as
horizontal value.
Press this button to trigger the measurement; the measured
value is displayed in the second line.
At the same time, the result is displayed in the summary line.
Indirect Measurement - determining a distance using 3
measurements
Press this button
four times; the
display shows the following symbol .
The laser is switched on.
圖示
.F
Aim at the upper point (1) and trigger the
measurement. After the first measurement
the value is adopted, keep the instrument
as horizontal as possible, the tools default
measurement result is the horizontal value
The display shows in the second line,
Aim at the middle point (2) and Press measurement button.
The value is adopted.
The display shows in the third line,
Aim at the lower point and Press this button to trigger the
measurement (3).
The result is displayed in the summary line, the third results in the
third line at the same time.
HISTORY STORAGE
Continually press and the next value of previous 20 records
(measurements or calculated results) are shown in reverse order.
Press to retrieve the next value of 20 records.
Press to retrieve the previous value of 20 records
- 7 -