Prokit's Industries NT-6570 - Manual (Page 7)

FUNCTIONS
Addition / subtraction
Distance measurement
The next measurement is added to the previous one, then
press the second measured value is shown and the result is
shown automatically.
The next measurement is subtracted from the previous one.
Then press the result is always shown in the summary line
with the previous value in the second line.
The last step is canceled.
Area
Press once. The symbol appears in the display.
Press button to take the first length measurement (e.g.
length).
Press again to take the second length measurement (e.g.
width).
After taking the second measurement, the area/surface is
automatically calculated and displayed in the summary line. The
last individual measured value is indicated at the second line in
the display.
Volume
For volume measurements, push button twice until the
indicator for volume measurement appears in the display.
Afterwards, Press this button to measure the length,
Press this button for width, press button for height.
After taking the third measurement, the volume is automatically
calculated and displayed. The last individual measured value is
not displayed.
Fig.E
Indirect measurement determining a
distance using 2 measurements
e.g. when measuring heights that require the
measurement of two or three measurements
as following step:
Press this button three times, the display
- 6 -