Prokit's Industries MT-2018 - Manual (Page 14)

13
.Capacitance RANGE Multiplication Factor
0.025uF X 0.0001
0.25uF X 0.001
25uF X 0.1
After measurement, turn-off the power switches either of the
MT-2007-C, or the tester.
TROUBLESHOOTING
Nevertheless, problems or malfunctions may occur.
For this reason, the following is a description of how you can
eliminate possible malfunctions by yourself:
Error Possible cause
The multimeter does not
work. Are the batteries exhausted? Is
the power indicator lit? Check
the state of the batteries and the
fuse 0.5A.
No measurements possible
via V/mA socket. Is the fuse defective? Check the
fuse 0.5A (fuse replacement)
No change in measured
values. Have you selected the right
measuring sockets? Is the
measuring range/mode correct
(AC/DC)?
Faulty measuring results
are displayed. Has null balancing of the display
or a 0 Ohm calibration for the
resistance measurement been
carried out? Is the batteries not
properly assembled in?