Peerless-AV IWB600-WB - Installation - Manual (Page 6)

6 of 7 ISSUED: 02-03-10 SHEET #: 125-9095-6 05-02-13
H
H
C D
C
I
E
Detail 5
Fasten two support brackets (C) to vertical supports (D) using four #10-32 x 3/8 thumb screws (H).
Slide support brackets (C) up until bottom of SMARTboard rests on support as shown in detail 5.
Tighten four #10-32 x 3/8 thumb screws (H). 6
Fasten knob (I) through outside hole in support bracket (C) to determine rubber bumper (E) placement.
Secure rubber bumper (E) to board.
Repeat on opposite side of board. 7
C