Peerless-AV PRS45 - Installation - Manual (Page 7)

ISSUED: 08-15-07 SHEET #: 055-9188-8 06-04-11
Visit the Peerless Web Site at www.peerlessmounts.com
7 of 13
For customer care call 1-800-865-2112 or 708-865-8870.
3/8 -16 THREADED ROD
(NOT INCLUDED)
Thread two 3/8-16 hex thin nylon-insert locknuts (not included) on two 3/8-16 threaded rods (not included) to the
desired height of projector mount assembly. Attach projector mount assembly (A) to the two 3/8-16 threaded rods
using two 3/8-16 hex thin nylon-insert locknuts as shown in fi gure 4.1 or fi gure 4.2.
A
Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
3/8 -16 THREADED ROD
(NOT INCLUDED)
A
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
4
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
3/8 -16 HEX THIN
NYLON-INSERT
LOCKNUT
(NOT INCLUDED)
FRONT OF
MOUNT FRONT OF
MOUNT
fi g. 4.1
fi g. 4.2