Peerless-AV PRS45 - Installation - Manual (Page 11)

ISSUED: 08-15-07 SHEET #: 055-9188-8 06-04-11
Visit the Peerless Web Site at www.peerlessmounts.com
11 of 13
For customer care call 1-800-865-2112 or 708-865-8870.
To adjust yaw (swivel) for wood stud, concrete ceiling, and threaded rod mounting applications: Loosen
wood screws (F), or locknuts for threaded rods, until projector mount can be rotated. Rotate mount to desired
position and retighten screws or locknuts.
To adjust yaw (swivel) for extension column applications: Loosen screw on projector mount assembly (A)
indicated below until projector mount can be rotated. Rotate mount to desired position and retighten screw.
To adjust pitch (forward and backward tilt): Loosen two screws on projector mount assembly (A) indicated
below. Tilt mount to desired position and retighten screws.
To adjust roll (side to side tilt): Loosen two screws on projector mount assembly (A) indicated below. Tilt
mount to desired position and retighten screws.
Projector Alignment
A
9
SCREWS FOR PITCH
ADJUSTMENT
SCREW FOR SWIVEL STOP
SCREWS FOR ROLL
ADJUSTMENT