Peerless-AV HP432-002-S - Installation - Manual (Page 5)

5 of 5 ISSUED: 8-29-07 SHEET #: 124-9102-4 08-17-11
Identify hole pattern on back of screen.
Note: Desktop mount only supports screens with a VESA 100, VESA 200 and VESA 400 hole pattern.
FOR VESA ® 100 x 100 MOUNTING PATTERN:
Thread four screws (I) into screen leaving 1/8" exposed thread as shown in fi gure 5.1.
Hook screen onto keyhole slots of adapter box (B), then fasten four screws (I) through the back of adapter box into
adapter plate as shown in fi gure 5.2.
FOR VESA ® 200 x 100 and VESA ® 200 x 200 MOUNTING PATTERN:
Attach adapter plate (A) to screen using four screws (J, K or L). Thread four M5 x 6 mm screws (F) into adapter plate
leaving 1/8" exposed thread as shown in fi gure 5.3.
Hook screen onto keyhole slots of adapter box (B), then fasten four screws (F) through the back of adapter box into
adapter plate as shown in fi gure 5.4.
fi g. 5.1
fi g. 5.2
fi g. 5.3
fi g. 5.4
1/8" SPACE
I
TIGHTEN
FASTENERS
THROUGH
BACK HOLES
1/8" SPACE
A
J, K or L
F
F
TIGHTEN
FASTENERS
THROUGH
BACK HOLES
B
I
I
A
B
F
5
• If screws don’t get three complete turns in the screen inserts or if screws bottom out and bracket is still not tightly
secured, damage may occur to screen or product may fail.
WARNING
© 2011, Peerless Industries, Inc. All rights reserved.
All other brand and product names are trademarks or registered trademarks of their respective owners.
Peerless Industries, Inc.
2300 White Oak Circle
Aurora, Il 60502
www.peerlessmounts.com